Conap™ Epoxy Potting & Casting Compounds
Conap Product Number |
Description |
MSDS |
|
CONATHANE®
UF-3 |
CONATHANE® UF-3 is a unique polyurethane foam characterized by low vapor pressure. UF-3 is unaffected by grease, oils, and most solvents. Also, it is ozone resistant, has excellent insulation characteristics, is dimensionally stable and will not rot or mildew. |
UF-3 |
UF-3 |
CONAPOXY® FR-1046
|
CONAPOXY® FR-1046 is a low cost, epoxy potting and casting system. Major characteristics include: low viscosity, low shrinkage, low exotherm, excellent resistance to thermal shock, and very good electrical insulation properties. When cured with any of the hardeners presented below, a hardness of 85-90 Shore D durometer is obtained. FR-1046 is an excellent choice when automatic meter, mix, and dispensing equipment is used because of non-abrasive fillers in the resin. |
FR-1046 |
FR-1046 |
CONAPOXY® FR-1047 |
CONAPOXY® FR-1047 is an inexpensive, flame retardant, non-abrasive epoxy potting and casting system. It has excellent resistance to thermal shock, low exotherm, and good electrical properties, typified by very good arc resistance. When cured with any of the hardeners presented below, a hardness of 80-90 Shore D durometer is obtained. |
FR-1047 |
FR-1047 |
CONAPOXY® FR-1080 |
CONAPOXY® FR-1080 is a two-part high temperature epoxy potting system designed to meet Class H (180°C) operating requirements. |
FR-1080 |
FR-1080 |
CONAPOXY® FR-1210 |
CONAPOXY® FR-1210 is a filled epoxy potting casting resin. When cured with any of the hardeners listed below, systems possessing low shrinkage, low coefficient of expansion, good resistance to mechanical and thermal shock and good electrical properties are obtained. Hardness of these systems ranges from 80-90 Shore D. CONAPOXY® FR-1212 is the Black version of CONAPOXY® FR-1210. |
|
|
CONAPOXY® FR-1273 |
CONAPOXY®FR-1273 is a two-component, low exotherm, long pot life epoxy potting and casting system with excellent handling properties. Because of it's excellent thermal shock resistance, CONAPOXY® FR-1273 is recommended for the encapsulation of strain sensitive devices. FR-1273 is also an excellent system for potting and encapsulating of electrical/electronic devices such as modules, transformers and coils |
|
|
CONAPOXY® FR-1274 |
CONAPOXY®FR-1274 is a two-component, low exotherm, flame retardant, long pot life epoxy potting and casting system with excellent handling properties. Because of its excellent thermal shock resistance, CONAPOXY® FR-1274 is recommended for the encapsulation of strain sensitive devices. FR-1274 is also an excellent system for potting and encapsulating of electrical/electronic devices such as modules, transformers and coils. |
|
|
CONAPOXY® FR-1610 |
CONAPOXY® FR-1610 with CONACURE® EA-039 is a high performance flexible epoxy potting and encapsulating system. Flexibility has been built into the cured compound without degradation of electrical properties at elevated temperatures. It cures with minimum strain on potted components; and there is little change in hardness after aging at 155°C. |
|
|
CONAPOXY® FR-1612-1 |
CONAPOXY® FR-1612-1 with CONACURE® EA-039 is a high performance flexible epoxy potting and encapsulating system. Flexibility has been built into the cured compound without degradation of electrical properties at elevated temperatures. It cures with minimum strain on potted components; and there is little change in hardness after aging at 155°C. |
|
|
CONAPOXY® FR-1810 |
CONAPOXY® FR-1810 is a flexible two-component, low exotherm, flame retardant, long pot life epoxy potting and casting system with excellent handling properties. CONAPOXY FR-1810 is filled with a non-abrasive filler to reduce wear on machine metering/dispensing equipment. FR-1810 has been tested by Underwriters Laboratories to be RoHS compliant and recognized to UL 94V-0. |
|
|
CONAPOXY® FR-1820 |
CONAPOXY® FR-1820 is a two component, flame retardant, short pot life epoxy potting and casting system with excellent handling properties. CONAPOXY® FR-1820 is filled with a non abrasive filler to reduce wear on machine metering/dispensing. CONAPOXY® FR-1820 has been tested by Underwriters Laboratories to be RoHS compliant and recognized to UL 94V-0. |
|
|
CONAPOXY® FR-1830 |
CONAPOXY® FR-1830 is an ambient cure two component, low viscosity, flame retardant epoxy potting, casting and coating system with excellent handling properties. CONAPOXY® FR-1830 is filled with a non abrasive filler to reduce wear on machine metering/dispensing equipment. CONAPOXY® FR-1830 is recognized to UL 94V-0 and is RoHS compliant. Products produced using CONAPOXY® FR-1830 can be shipped into the EU; however, shipment is restricted into the European Union of uncured part A and part B. |
|
|
CONAPOXY® RN-1000 |
CONAPOXY® RN-1000 is a diluted epoxy potting and casting resin. When CONAPOXY® RN-1000 is cured with the hardeners listed below, these systems possess low shrinkage, low exotherm, good thermal shock and electrical properties, with a hardness range of 80-90 Shore D are obtained. |
|
|
CONAPOXY® RN-1200 |
Casting resin. When cured with any of the hardeners presented below, these systems possess low viscosity, low shrinkage, low exotherm, excellent resistance to thermal shock, good electrical properties and hardnesses |
|
|